Car Diagnostics Testing & Check Engine Light Service
Today, most cars are controlled by computers. The fuel injectors, the spark plugs, the steering system and more are all told when to fire and when to move by an on-board computer system. If something’s going wrong with your car or engine, your on-board computer can tell you about it. If the computer senses something is wrong with one of your car’s systems, it will turn on a dashboard light, like “ABS Brakes” or something less specific, like “Check Engine.”
The ASE-Certified diagnostic mechanics at Driver’s Edge use advanced diagnostic equipment to identify which part of your vehicle or engine requires service. Our car diagnostics testing service offers:
- Testing on any type of car or truck
- Expert, factory-trained technicians experienced in reading diagnostic codes
- Testing that meets the specifications of the make and model of your vehicle
Some people try to disregard their Check Engine light. And some have even gone as far as disabling it and that could be a costly move. The best thing to do when your check engine light appears is to bring your vehicle in to a Driver’s Edge location for a professional ASE Certified diagnostic testing service.
Once we determine what the problem is we’ll carefully review with you what (if any) work needs to be done and exactly how much it will cost. With Driver’s Edge, there are never any unpleasant surprises. We do our best to keep you informed every step of the way.
Reasons Your Check Engine Light Comes On
It is common for your check engine light to illuminate momentarily when you first start your vehicle. But if the light stays on, your vehicle’s internal computer system is trying to tell you that there is an issue.
A steadily illuminated check engine light indicates that there is a problem but it may not yet be serious. Your vehicle could simply require an adjustment or need a part replaced. If the light is flashing, this is indicative of a serious problem within your vehicle’s ignition, fuel, or emission systems and should not be ignored. Whether the light is steady or flashing, bring your vehicle into your closest Driver’s Edge location as soon as possible for a car diagnostic test. We can pinpoint and address the issue and perhaps help you avoid costly auto repairs.
It can be hard to say for certain what is causing your light to come on without having a check engine light diagnostic testing service done. There are some common causes of a steady or flashing check engine light, including:
- A loose gas cap
- Failing oxygen sensor (O2 sensor)
- Bad spark plug or ignition coil
- Bad spark plug wires
- An issue with the catalytic converter
- Bad mass airflow (MAF) sensor
- System running too rich or too lean
- EGR valve problem
- Engine vacuum leak
- Excessive fuel consumption or release of air pollutants
These are just a few reasons that your check engine light may be on. Our ASE-certified mechanics specialize in diagnostic testing services and can help identify any issues and you get back on the road.
Book an appointment now for a check engine light diagnostic service at Driver’s Edge.
What Car Diagnostic Scans Tell Us
Modern vehicles are highly computerized with computer processors, microchips, and sensors throughout the engine and other components. All of these things can signal problems within the transmission system, exhaust system, ignition system, oil tank, gas tank, and more. During a car diagnostic scan, our auto technicians hook a car diagnostic computer to your vehicle and determine which engine or component parameters are out of normal range. Any abnormal variances will produce a trouble code. These codes, which point to specific systems or components, make it easier during further diagnostics to zero in on exactly where problems may be.
The car diagnostic scan of your vehicle is almost like having a detailed physical done at the doctor. It will tell us very specific things about your vehicle, including:
- Ignition and timing issues
- Performance of the fuel injectors
- The level of buildup in the combustion engine
- Whether the ignition coils are firing properly
- Air and coolant temperatures
- Engine rpm levels
- Crankshaft and camshaft position
- Throttle opening
When the car diagnostic test is complete, the computer will produce any specific trouble codes for any issues that need to be corrected. Those codes then direct the mechanics to look in a specific area for the problem.
The diagnostic testing tools used can also scan the vehicle’s computer system for manufacturer-specific notifications and stored information about the vehicle’s history. This gives us a more complete picture in order to determine exactly what should be done and be able to perform the best repair possible.
Common Diagnostic Codes
On-Board Diagnostics, Version II (OBD II) diagnostic trouble codes will range from P0100 to P1899. Each letter and number in the code refers to a specific part of the vehicle. Most often, the first letter is often a “P,” which refers to the power train. Other codes that start with a “B” refer to the body, a “C” refers to the chassis and a “U” means undefined.
In the second placeholder, the number zero is a generic code shared by all manufacturers. But, some manufacturers use a specific code in this place so the number 1 may appear here. The third digit determines the specific area of the problem. More specifically:
- 1 = fuel or air problem
- 2 = a problem with the injector circuit
- 3 = an ignition problem or the engine is misfiring
- 4 = an emission control problem
- 5 = a vehicle speed or idle control problem
- 6 = a computer or output circuit problem
- 7 or an 8 = a transmission problem
The fourth and fifth digits of the diagnostic trouble code refer to more specific information to further identify which system is malfunctioning. These digits vary by vehicle make, so the technician can decipher what the rest of the code means for your vehicle.
The Benefits Of Having Car Diagnostic Testing Done
One of the biggest benefits of having a car diagnostic service done is the time and money that can be saved. Today’s diagnostic testing capabilities now make it possible to catch problems before they become larger, more expensive issues. Also, having a diagnostic test done using a diagnostic auto scan tool takes out almost all of the guesswork of the past. It saves you and your mechanic a lot of time troubleshooting a problem, and it saves you money.
With a computerized car diagnostic check, the specific problem is highlighted so that the mechanic will fix only what needs to be fixed on your vehicle. Also, because it is simply a matter of hooking up your car’s computer to the scanning device, a car diagnostic check can be performed rather quickly. So the test itself is not something that will keep your vehicle at the auto service center all day.
Proudly Serving the Following Locations:
- Driver’s Edge | Allen
- Driver’s Edge | Arlington
- Driver’s Edge | Basswood Blvd
- Driver’s Edge | Flower Mound
- Driver’s Edge | Fort Worth
- Driver’s Edge | Frisco
- Driver’s Edge | Grapevine
- Driver’s Edge | Irving
- Driver’s Edge | Keller
- Driver’s Edge | Lewisville
- Driver’s Edge | Mansfield
- Driver’s Edge | McKinney
- Driver’s Edge | Plano
- Driver’s Edge | Prosper
- Driver’s Edge | Southlake
- Affordable Auto | Little Elm
- Affordable Auto | McKinney
- Car Care Central | Plano
- Overseas Service Haus | Dallas
- Road Runner Lube & Tune | Fort Worth
- Valvoline Express Lube | Rockwall
Frequently Asked Questions
You don’t have to wait until your check engine light comes on to have an auto diagnostic test done. If you start to hear or feel something different when driving your vehicle, bring it in for a diagnostic test to accurately determine what is going on.
It is a good idea to take a proactive approach and make car diagnostic tests a regular part of your preventative car maintenance routine. Bringing your vehicle in for diagnostics testing at least once a year will help uncover minor problems that can’t be seen or heard yet and will not yet cause a check engine light. This saves you more money by helping you avoid costly major car repairs in the future.
Another instance where you should have an auto diagnostic test done is when you are checking out a used car to purchase. This can help give you an idea of what kind of shape the vehicle is truly in before purchasing it.
Book your appointment online now for a car diagnostic test at your closest Driver’s Edge location. Make sure to check out our coupons page for the latest deals to help save you money on vehicle diagnostics or other repair services.
Comprehensive car diagnostic tests, like the ones we perform here at Driver’s Edge, analyze all of your vehicle’s most important systems. They can help pinpoint problems within the vehicle’s engine, transmission, exhaust system, brakes, and other major systems and components, as well as performance issues with the ignition coils, fuel injector, timing, airflow, coolant, and throttle.
No. The code tells us where in the engine or components that the fault was measured, but not exactly what’s wrong. You will still need to bring your vehicle into a auto shop for professional diagnostic testing to determine just what the problem is.
Book your appointment online for a car diagnostic test at Driver’s Edge today!
When they notice an active check engine light, Dallas drivers should act immediately. However, you may not know exactly what to do in this situation, since anything from serious engine trouble to minor issues like a loose gas cap can cause this light to turn on.
Fortunately, you don’t need to check anything by yourself when your check engine light activates — this light won’t give you enough information to solve whatever problem your vehicle is experiencing, anyway. Instead, you’ll need to schedule a car diagnostic test at a trustworthy Dallas auto shop like Driver’s Edge Complete Tire & Auto Service in the near future.
Of course, this advice assumes that your active check engine light is solid. However, if the light is blinking on and off, you’ll need to visit a mechanic for auto diagnostic and repair work as soon as possible. A flashing check engine light means that your car has a problem that requires immediate attention — as soon as you notice that this light is blinking, pull over to the side of the road and turn your engine off.
All sorts of problems can activate your vehicle’s check engine light, but some issues are more common than others. For example, your check engine light may indicate that you’re dealing with:
- Gas cap problems: In certain vehicles, a damaged, missing, or loose gas cap could be enough to trigger the check engine light. Of course, you still shouldn’t ignore this issue — without a properly attached gas cap, gas fumes can leave your vehicle and escape into the atmosphere, negatively impacting your fuel economy.
- A malfunctioning oxygen sensor: When your oxygen sensor stops working as it should, your vehicle will be unable to accurately measure the unburned oxygen in its exhaust system (and it will burn more fuel than it needs to as a result). To save on gas, visit a local auto shop for auto repair diagnostics and a new oxygen sensor.
- Faulty spark plugs: Spark plugs have an important job to do in your vehicle — they ignite the fuel in your car’s combustion chamber. If your spark plugs (or your spark plug wires) encounter trouble, this situation could easily result in an active check engine light.
- Catalytic converter failure: If you neglect engine issues for long enough, you could find yourself dealing with a nonfunctional catalytic converter. When this component stops working, your vehicle will waste gas, run hot, suffer from reduced performance, and emit pollutants and toxic gasses.
When you bring your car into a local auto shop after noticing that your check engine light is on, the mechanics working there won’t just rely on guesswork to determine what’s going on. Instead, they’ll hook your vehicle up to a specialized diagnostic scanner.
By using this equipment to perform a car diagnostic test, your shop’s technicians can find out exactly what problem(s) your vehicle’s on-board computer has detected. Once they’ve found the information they’re looking for, your mechanic will have a much easier time giving your car the attention it needs.
A vehicle diagnostic test doesn’t explain what issue your vehicle is dealing with in written English — instead, it shares this information in the form of a specialized OBD II code. Each of these codes starts with one of four letters: “P” (for “powertrain”), “C” (for “chassis”), “B” (for “body”), and “U” (for “network”).
The next digit in the code will be either a zero (for generic codes) or a one (for manufacturer-specific codes). The digit after that will explain what system has encountered a problem. Finally, the remaining digits in the code provide additional information on whatever issue your vehicle is dealing with.
With all that out of the way, some of the most common auto repair diagnostics include:
- P0300 (cylinder misfire)
- P0171/P0174 (system too lean)
- P0420/P0430 (inefficient catalytic converter)
- P0780 (shift malfunction)